Urinals & Control Systems

Ceiling Mount Urinal Control

The fill-time for the cistern can be customised by the user using the appropriate switches. There is also a set of dip switches to adjust the time delay after activating the PIR.

The system’s fast fill design helps eliminate scale problems associated with slow or drip fed systems. An automatic ‘janitorial’ flush every 12 hours is also programmed into the unit, should the system not be used during that time.

The individual sensing urinal control systems are designed to detect individual users and only flushes when the user walks away.

Individual Control System

The individual control system (W05-007) can be used to flush single or double station urinals, and comes with sensors. This only flushes when user walks away from the urinal. Mains powered only.

• Up to 80% savings on water costs.
• Extremely reliable.
• Low maintenance.
• Low power consumption.
• Solenoid valve included.
• Includes power PSU or batteries.
• Adjustable fill time (15 mins max).
• Adjustable delay time.
• Janitorial flush (After 12 hours of non-use)
• Kits available for single or double bowl requirements.

Sandringham DOC.M Urinal

Urinals accessible to wheelchair users and ambulant disabled.

Sanura Urinal 50cm

50cm Wall urinal in vitreous china for exposed plumbing.

This product is for use with Mura Exposed 4.5L Auto Cistern. Comes with syphon, petcock and supports.

• Also available in 40cm for junior use.

Spectrum Urinal HTM

Spectrum Urinal, HTM-URH

Technical Specifications:

• Width(mm): 360
• Height(mm): 560
• Depth(mm): 330
• Material: Vitreous China

Flush Vol: 4.5L

Meets HTM regulations

Spectrum Urinal HTM

Contour HygenIQ panel mounted single, double or triple urinal ranges, UR H 1, 2 or 3.

• Concealed high level cistern, pipework  and trap.
• Meets HTM regulations.

Stainless Steel Urinal

Specification

• Constructed in one piece without joints or crevices from grade 304 stainless steel.
• Can be used either with a top or rear water inlet (blanking plug supplied).
• Shaped bowl and anti-vandal spreader assembly ensures an efficient spread of flushing water over the internal surface.

Finish

• External surface of bowl is polished to a satin finish.
• Internal surface polished to a ultra smooth finish that is hygienic, easy to clean and resistant to scale build-up and deposits.

Additional Options

• Also available in grade 316 stainless steel to order.
• Stove enamelled.

Surface Mount Urinal Control

The surface mount urinal control (W0405) is used for single or multiple station urinals and can be surface or ceiling mounted. This works by using a passive infrared (PIR) detector which detects movement within the ‘sensing area’, switching the unit into a timing mode.

The ceiling mount urinal control (W0406) is used for single station urinals.
After a pre-set time, the solenoid valve opens allowing water to flow into the cistern activating the flushing cycle.

Urinal Divider

Specification

• Constructed from 50mm diameter grade 304 stainless steel welded tube with a 3mm grade 304 stainless steel welded inset panel.
• Ligature resisting unique design.
• Secured to the wall via 6 x M8 stainless countersunk fixings which are included.

Finish

• 304 stainless steel.

Additional Options

• Also available in grade 316 stainless steel to order